Bezica Shower Filter Solutions

Installation guide

(Shower Filter)

(Cartridge)

Step 1: Remove the Shower Head

Unscrew the existing shower head by turning it counterclockwise.

Step 2: Apply Teflon Tape on Shower Arm

Wrap Teflon tape (5–8 turns) evenly around the threads of the shower arm.

Step 3: Install Filter and Apply Tape

Screw the filter onto the shower arm (clockwise), then wrap Teflon tape on the outlet side of the filter.

Step 4: Fix Shower Head on Filter

Attach the shower head to the filter and tighten gently; use a cloth + wrench if needed to avoid scratches.

Tip: If leakage persists even after applying Teflon tape, add rubber rings on both sides of the filter.

Step 1: Unscrew Shower & Filter
Detach both the shower head and the filter by turning them counterclockwise.

Step 2: Remove Old Cartridge
Take out the used cartridge and rinse the housing with clean water to remove any residue.

Step 3: Insert New Cartridge
Place the new cartridge inside the housing, ensuring it is seated properly in the centre.

Step 4: Close Housing
Screw the housing back tightly and reattach the shower head to the filter.